SUPCO GIDDS-653260 Universal Refrigerator Door Gasket 32" x 55"

No any force !

Unfortunately, a photo of the cross-section wasn't included in the listing, so I knew I was taking a shot in the dark on whether or not it'd work well enough. I was HOPING for a drop-in replacement for what I was replacing. These have a lip, rather than a stab-in bit. However, I was able to remove the rails on my fridge, and use those to secure the lip, as if it was a long, multi-holed, fender washer. I probably should have pried the plastic inner part of the door off, and slid the lip between the two parts of the door, but I didn't.Still, for a non-OEM replacement, they're very good.Also, the magnets stick out of both ends of all four corners, and can be pulled free easily. This makes trimming the two separately, and in a way that the magnet part overlaps the gasket part, easy to accomplish.Edit. Fridge is reassembled and running, in adverse conditions, (hot room), and is doing great. I would buy this again in a heartbeat. Also, I attached a photo of the seal, with the strip pulled back to reveal the rail that's holding it in place.

In order to even see if this product will work, you have to cut it to size, then it is not returnable, when you find it doesn't work. Complete waste of money and not to mention the hours it took to find out it wouldn't work.

Old gasket was same thickness and width as this one. Couldn't order OEM gasket because the company went out of business. I read a number of reviews for input on how best to install based on trial and error by others.Install went well. Had to take door off and remove many many screws in order to take off old gasket. Put new pieces in place and then I made cuts to match up the pieces using a razor knife. I used a marine adhesive to join them. Got the adhesive from HD for about $6. Everything went perfectly. Remounted the door and it wouldn't shut all the way unless I pushed on the door, but as soon as I let go the door popped open. The new gasket didn't have the flexibility of the old gasket, and the magnet in the new gasket isn't as strong as the old gasket. There is some adjustment for the door but even at the furthest point the issue remained.Oh well

I used this product in an unusual way by cutting into my main supply HVAC air duct and installing a door of metal tin. To seal the door closed when the air system is running, I used this gasket. My HVAC fan runs with no leakage through the gasket, and I now have an accessible door I can use to open/close a damper inside the duct and to work inside the duct. The one side of the gasket I gorilla-glued onto the tin door, and the other side closes on the duct through the magnetic strips inside the gasket. My only criticism is that the magnetic strips inside the gasket seem a little weak - leastwise, it isn't very strong when applying to my medal duct. To counter this, I have a weight propped against the door to keep the gasket pressing nicely against the metal duct. I have still given the product a five star rating because the magnetic strips probably would work better on a refrigerator, the intended use for the product.