SYNCWIRECell Phone Ring Holder Stand, 360 Degree Rotation Finger Ring Kickstand Polished Metal Phone Grip for Magnetic Car Mount Compatible with iPhone, Samsung,Pixel, Smartphone Accessories - Blue

How did I live this long without this product?! This simple little ring has completely changed the functionality of my new iPhone. I love the new phone, it has a huge screen, it has amazing cameras, and so much more. The main issue is that it's physically huge! It's massive and quite difficult to use with one hand. It's easy to hold but when it comes to typing with your thumb on one hand there's a very real risky feeling that the thing is going to slip from your hand.My wife has one of those pop things on her iPhone X case and she sort of likes it. She likes it because it makes it more secure in her hand but she doesn't like that it's plastic and not really confidence inspiring when holding it. Once she put my much larger phone in her hand and used this ring she said "order me one now". Seriously, it's that good.The back of the ring comes with a 3M adhesive circle and says to wipe clean the phone or case (and it comes with an alcohol pad which is nice) and then peel off the sticky backing and hold for 10 seconds. Well, as you can see from the picture I did more than hold it for 10 seconds. I used a vice grip to hold that sucker on there for a few minutes as tight as I could squeeze that thing. Is that overkill? Maybe, but I wanted to be sure that if this thing ever lost its hold on the phone it wouldn't be for any mistake that I made.I love that this is made of a hard metal and not plastic. As I mentioned before that is one big plus that my wife loved instantly. It really feels solid and sturdy. The ring itself rotates endlessly 360º around the base that sticks to the case allowing you to hold the phone in either hand however best feels comfortable. It's important to note that the ring does not "spin" as in fast. There is some tension behind the ring so you actually have to raise the ring at a 90º angle to the phone and gently rotate the ring gently so as not to rip the dang thing off the phone/case. I don't know if that would happen - I'm not disparaging the 3M sticky - I just don't want to test it and find out. But again, it doesn't just spin around the base like some spinner toy, you actually have to position it where you want it and it stays firm.When the ring folds down it is only very slightly more thick than the extrusion that goes around the camera housing portion of my particular case. Of course all cases very so keep that in mind. I have an extremely minimalist and thin hard case that is more form over function but still keeps the case secure and allowed for a very good adhesive surface for the 3M sticky.When the ring is extended it can be used as a kickstand for the phone itself as you can see from some of the pictures. Of course I had the phone out of the case to take the pictures but rest assured that it functions flawlessly with the phone in the case as well. I installed my ring a little south of center on the phone as that felt more comfortable in my hand to use. Even at this slightly lowered location it functions beautifully as a kick stand for the phone.Seriously, there is truly nothing I don't like about this ring. I hope that the 3M sticky pad holds firm for a long long time because this is the best thing I've bought in a long time. Well, best two thing since my wife demanded I buy her the rose gold version for her phone now too!Just buy this! You won't regret it.

I put this ring stand on my silicone phone case that only had a small kickstand. It was easy to install. I put it so that I could hold my phone with it. Believe me when I say it really sticks! It wouldn't budge. I used it to prop up my phone, hold my phone, and even carry my phone with the ring sometimes. Never moved an inch. It far outlasted the kickstand on my case. I tried to keep using the case, but without the additional kickstand, it was a little hard for me to grip like I was accustomed to gripping. So, I broke down and ordered a new case. I tried to pry this ring off the old case, but it would not come off! It has been on that case for over two years and looks brand new today. The old case looks really bad and discolored, but the ring stand is going strong. I will be ordering a new one for my new case.

I have been using these for the past few years now, and I have been pleased overall. I will say that over time, the ring part loosens up and will not support the phone as a stand. Eventually it gets to the point that the ring has almost no resistance at all and just kind of flops about, which gets to be annoying. However, I’d say it’s absolutely worth buying considering the price and the duration and frequency of use I get out of each ring before it gets to that point. The adhesive is very strong over a long time even with exposure to dirt and moisture. One they wear out, I just replace it with a new one. So a two pack easily lasts me a couple of years of use.

The ring swivels around a full 360° and feels very solid. There’s a good amount of resistance so it holds itself up well. The adhesive is strong and it came with an alcohol wipe to prep the phone surface and an extra 3M adhesive. I have only been using it for a couple weeks but it still looks pristine. I know from experience that a cheaply made product would already be showing scratches from the use I’ve put it through. Would definitely recommend.

After 5 months of using this, I am glad I went through the hassle of installing it & I am raising it from a 4- to a 5-star review. (My initial frustration was only with the installation.) It is more comfortable than the "pop-up" one I used for a long time & this one flattens more for putting the phone away. Also, this is more professional or "adult-looking" than the pop-up one I had. The adhesive is still as snug as when I first applied it. I love this one so much now that I will probably not use another type.I couldn't figure out what those other white sticky discs (not the 3M) were for. I watched the product video and made a mess of things. In the video, the girl uses one of those white discs before she applies the 3M. Well, that was a disaster because the 3M doesn't stick to the white disc. Anyway.Once I ignored that and just applied the holder using common sense, things went great.Pros:- Seems like a good price for the 2-pack.- So far, the rings are holding well on both the hard material of my charging case and the rubberized material of the regular phone case.- I like the 360. Didn't have to worry about installing the right way up or down.- The rings are very sleek-looking and the mirror finish looks nice.- The ring is pretty comfortable & not as sharp as I feared.- The ring is much flatter than my pop-up holder. This makes it easier to store my phone in my pocket or purse.Cons:- The included items could have been labeled. The product page video uses one of the thin white stickies (not the 3M adhesive). When I did the same thing, it was a disaster. The 3M did not stick to that as it did in the video so I wasted one of the adhesives.- The mirror-finish is a smudge-magnet. It looks nice but matte would be better because my fingers will, of course, leave smudges. I keep wanting to clean it off.Overall:I do like this but I was really irritated to lose one of the 3M stickies because of that stupid video. If this lasts, I will be happy but I've had the pop-up holder for over 2 years with no problems so that is going to be hard to beat.

I’ve bought this before long time ago, and have tried different ones. This is the easiest to put on and will hold for long time, they send an extra sticker in case you need but I never used.I have a small fingers so the ring is a bit big and will turn around easily .

I love these for several reasonsthey have a really good 3M adhesive tab that holds really well and has not fallen offthey are a nice design and fold flat when not using.I purchased the 2 pack thinking I would have a spare but my husband loves it as welland wanted my extra one. I had to order more because my mother and friends wantedthem now

Gute Qualität, einfach und sicher zu montieren.

La pegué a la funda del móvil y ha quedado bien fijada, no parece que se vaya a despegar después de 15 días, y sobre todo cumple perfectamente con las funciones esperadas, como hacer de soporte para ver una peli o hacer que se pegue a un soporte de imán, se ve robusto.Lo único que serie mejorable es el grosor, si consiguieran reducirlo sería perfecto.

Die Ring Handy Halterung ist gut verarbeitet, einfach anzubringen und ermöglicht ein bequemes Halten sowie ideales Aufstellen des Handys. Auch für kleine Hände perfekt, selbst bei größeren iPhones. Ein rundum gelungenes Accessoire!