Temperature Sensor 1 M Z-Wave Plus – Pack of 1 ZMNHEA1

The Qubino devices are great. They cover the spectrum of automation and the quality is great. As for the temp sensor it works fine also but NOT without some work. As others have mentioned the shrink tubing on the sensor plug end is too far down and prevents the plug from fully engaging. I had to do delicate surgery to trim the shrink tubing back. The rub is that the tubing then will not protect the wires from pushing out of the connector. I finally had to go the Qubino in Hubitat and watch if the sensor reported temp or not. I had to push on the plug until the sensor reported. I then covered it with liquid electrical tape to keep it in place. More work than most will go to. Qubino needs in my opinion to use different plugs that have a positive latch when inserted. After all the work it works great. The Qubino and temp sensor is fully supported in Home Control Automation software. HCA fully supports Hubitat and thus the Qubino. The program can do some amazing things with the unit.

Bought this sensor to add to my Qubino 1D relay. Tip: my existing Qubino 1D relay came with a blank plugged into the sensor port, which I had to remove prior to plugging in the sensor. Also, I had to trim some of the heat shrink from around the plug, which prevented it from seating fully into the socket on the relay.

Ottimo prodotto, diciamo che l'unica pecche è che se abbinato ad un controller montato in una 503 è ingombrante, in quanto il cavo è particolarmente lungo.Per il resto offre letture molto accurate. Semplicissimo da collegare.

bien : "SI" bien positionné ! puisqu'à 10 cm près vous aurez un fonctionnement erratique si la sonde est chauffée par le convecteur, elle doit donc se retrouver tout en bas de celui-ci, juste au raz, presque plaquée à la cloison, pour qu'elle capte l'air frais qui arrive et non qu'elle soit réceptive au chauffage direct. Avec 1mètre, vous aurez de quoi la placer comme vous voulez, on enroule le surplus derrière, et on fixe le fil au raz de la sonde par exemple avec un clip de cable. Pour le reste, une fonction thermostat virtuel (% de temps de chauffe selon qu'on s'approche ou pas de la consigne, comme sur Eedomus) sera parfaite; éventuellement juste une programmation simple (se déclenche selon la consigne)...

Inzwischen habe ich den Sensor drei Mal verbaut, in Verbindung mit einem Qubino Relay. Die Messwerte habe ich mit einem handelsüblichen Thermometer verglichen und die gemessenen Werte waren ziemlich deckungsgleich. In Verbindung mit meinem Smarthome System lasse ich mir damit remote die Temperatur der Sauna anzeigen und steuere eine Terrariumheizung. Da ich keine Genauigkeit auf das zehntel Grad brauche, bin ich hochzufrieden. Er wird einfach in das Relais eingesteckt und dann funktioniert das. Kein weiterer Installationsaufwand.

I have multiple of the Qubino Modules in the house and several of them have Temperature Sensors as well. I think the only real sad part is the length of the cable but besides that, the Sensors and Modules are really awesome.I use them combined with a Raspberry Pi, Razberry Z-wave Controller and Openhab

Es un accesorio muy recomendable si tienes los controladores de esta marca. Me permite controlar la temperatura en las habitaciones para así poder ajustar los radiadores y las persianas.