Select Hardware 36cm (14-inch) Flat-Free Puncture-Proof Wheelbarrow Wheel - 16mm Ball Bearing Bore, Optional 21mm Bushes, Spacers Kit Included, 181kg Load Capacity

A bit more expensive than some, but well worth it. Several fittings for different sizes so incredibly easy to fit and hopefully no more flat tyres. I have two wheels on my barrow so will definitely buy a second one when I need it.

Excellent wheel, Fitted perfectly. I had gone to a lot of trouble checking the tyre would fit -and it did

Good product which comes fitted with roller bearings. Unfortunately the axle diameter of my barrow was slightly too large to fit, so I removed the bearings and used the supplied nylon bushes instead. With a combination of the new components and the originals on the barrow, I managed to get a decent fit.

I bought this to replace a pneumatic tyre that had a puncture (had lasted 12 years without a puncture - so did very well).This one is very easy to put onto the wheelbarrow and has spacers if you want to get an exact fit (I haven't bothered as it went on and worked OK without them).I used it today to wheel 10 lots of leaves and wood chipping up and down a steep hill, to put onto my paths. Worked well.

I have a Green County Clipper Wheelbarrow (90-110 ltr) that suddenly got a puncture. I spent over 2 hours getting the tube out - the repairing the split (right next to the valve). and had one hell of a time trying to get the tyre back on after first testing the inner-tube. Finally got it assembled and pumped up - but as I prepared to replace it on my barrow i heard the dreaded hiss and it immediately went flat again. After scraped bloody knuckles and a reprimand for my language I'd had enough - I went on the internet to Amazon and ordered the Select Hardware 9709 360mm Flat Free Wheelbarrow Wheel on Prime (which was £10 cheaper than buying it locally). The Flat Free Wheel arrived next day and it literally took me about 10 minutes to remove the bearings from the new wheel and replace them with the ones from my punctured wheel. Note: I did not use a screwdriver (as illustrated) to remove the bearings - I simply pushed a wooden dowel through the hole and knocked out the bottom bearing from above then turned the wheel over and did the same again. I removed the bearings from my original wheel and fitted them in the new Flat Free Wheel, they just needed knocking in gently using a piece of wood and a hammer. I really recommend this product - it fitted perfectly using two of the spacers provided - It runs very smoothly and there is no play or wobble. A GREAT PRODUCT at a great price. Thank you Amazon.

I needed a replacement tyre/wheel for a wheelbarrow as it's original tyre had gone flat and perished. Although not the cheapest this tyre/wheel had good reviews and I can see why. I have to say I used the axle, bearings and fittings of the old wheel which luckily fitted. This wheel comes with a selection of spacers and a set of bearings but no axle. The gauge of the axle of the old wheel was slightly to large for the supplied bearings so all the extra spacers and new bearings just went into the recycling, I'm sure they would be useful for other buyers though. The wheel and tyre works very well and has restored the old barrow to a useful piece of equipment in the garden.

While this is an excellently produced item the spacers and inserts provided are NOT universal. In my case the axle was 20mm, and to sort the issue I seperately sourced 35mm to 20mm steel roller bearings, which made a great job.So if not clear, ask supplier first, I suggest.

It is a good product but the bore hole is small and although it says that is it adjustable by removing the bearings, I couldn’t do this ( I tried and tried). So ordered a new axel from elsewhere. V frustrating. Instructions are scant at best